|
i suggest connecting the positive wire to the starter and making a hole through the main ECU harness grommet to feed the 0 gauge through. Get audio 0 gauge cable since it's more flexible. Run inside cabin and you should be able to get it through to the trunk behind the rear passenger side trim panel.
At the rear passenger side corner of the trunk are a few bolts that you can use to clamp down a battery tray. 1 of these bolts won't line up to the standard battery tray holes. sand the body down here and you can use that for the ground.
there: no holes drilled in metal and wire safe from dangers of bottoming out
just be cafeful when drilling the grommet to not hit any ecu harness wires.
__________________
Club Spirited Drive - for all who enjoy the thrill of driving - clubSDx.com
|