Quote:
Originally Posted by turbo2nr
|
Just because companies comes up with some bullshit bushings can makes the part physically bolt doesn't mean its correct. Notice there isn't even 1 picture with a z33 diff bolted to a S14 subframe with the factory sway bar. The reason is the z33 diff isn't physically in the same position as factory R200 diff. Its actually off by a lot. Like mentioned earlier you have to drop the subframe out of the car and modify the subframe to accept the Z33 diff. I just finished doing mine 6 mths ago. If you don't have experience fabrication I would not recommend doing this job. You have to make sure the diff is in the same location as the factory diff so that your driveshaft angle is still factory.