Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

turbo3000 · 07-06-2019, 06:04 AM

Hi there,

Im working on a z33 diff conversion. So far so good but im stuck on the ABS speed sensor.
the stock s15 has it in the pinion.

the z33 on the axles however, i had them shortened so the pulse width sprocket is deleted.

What are some other solutions that retain speedo signal & ABS?

is there a way to use the front abs hub sprocket in the rear end? And if possible, would this sprocket upset the ABS balance?

Any guidance would be a big help.

thanks,

turbo3000.

07-06-2019, 06:04 AM	#1
turbo3000 Join Date: Jul 2019 Location: Australia Posts: 1 Trader Rating: (0)	S15 ABS Z33 diff conversion Hi there, Im working on a z33 diff conversion. So far so good but im stuck on the ABS speed sensor. the stock s15 has it in the pinion. the z33 on the axles however, i had them shortened so the pulse width sprocket is deleted. What are some other solutions that retain speedo signal & ABS? is there a way to use the front abs hub sprocket in the rear end? And if possible, would this sprocket upset the ABS balance? Any guidance would be a big help. thanks, turbo3000.