Quote:
Originally Posted by AdrenalineS14
yeah your gonna have to go into your gas tank through the fuel pump assembly in your trunk... when you get to it there are 4 10mm screws remove them pop off the cover and move it aside... then remove the gas cap to let pressure out... with that cover removed you'll see 2 plugs(best to remove fuel pump fuse first) unplug those and remove the 3 fuel lines(gas might still come out of those lines so be ready to clean up the spilled gas and plug the lines with something)... then you'll see a black ring, take that ring off(use a flathead screw driver and hammer to tap it loose its threaded on) you should be able to unscrew by hand once its broken loose... with the ring removed pull off the white cap gently and put it to the side... with a flashlight you should be able to see the float and the bracket for the fuel pump(facing the trunk) inside you should see the clip on the right take your float and slide it back onto the clip and your done... i did that and used galvanized steel wire to lock it in place pain in the ass to do that put worth it  cause now your float will never come off  .... galvanized steel wire is resistant to gas so you'll be ok!... and check the wiring in there too just in case i check EVERYTHING i had a small tear on one of the fuel lines and had to replace that ishhh it a pain in the ass too lol good luck brotha
|
Galvanized steel wire you say? Might I ask the method of fixing the float to the clip? It just slides on so how did you fasten it? Thanks.