|
first things first you must get rid of the pinch. if your a budget drifter like most are grab a 2x4 and a sledge, take out your taillight and anything in that area. place the 2x4 in the spot above the taillight, begin hammering, if that doesnt help remove the pinch, place the 2x4 on the inside of the pinch and begin hammering this may have some adverse affects but untill you do it youll never know. if you do get the pinch out its time for some hammer work. if your really cheap all youll need for this part is a ball peen hammer and the same 2x4. i would advise dropping a little bit of cash and going to a hardware store and buying a sheetmetal/ body work hammer and a dolley. from here on its a simple mater of how much time you want to spend place the dolley on the outside of the quarter pannel and hammer on the inside. be shure to hammer only when the dolley is on the other side of where your hammering. hope that helps.
|