Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - This is the roll center, suspension pickup, and steering angle modification thread.

SoSideways · 04-11-2010, 11:04 AM

The Tein S-chassis inners have like, 2" of threaded portion, and from what I could gather, is about 2" or so longer than the stock tie rods, and stock tie rods are the same length as the Z32 and Tein Z33 tie rods.

The problem with cutting the inners down would be that, I cannot provide that service for the others; people would have to find machine shops in their area to have their tie rods milled down, or if they don't have a machine shop nearby, they'd have to send it out. Not efficient or cost effective for anyone.

04-11-2010, 11:04 AM	#641
SoSideways Post Whore! Join Date: Apr 2003 Location: 你老母 Posts: 4,371 Trader Rating: (4)	The Tein S-chassis inners have like, 2" of threaded portion, and from what I could gather, is about 2" or so longer than the stock tie rods, and stock tie rods are the same length as the Z32 and Tein Z33 tie rods. The problem with cutting the inners down would be that, I cannot provide that service for the others; people would have to find machine shops in their area to have their tie rods milled down, or if they don't have a machine shop nearby, they'd have to send it out. Not efficient or cost effective for anyone. __________________ SoSideway's iTrader Rating!! *SoSideways' Review Thread!!* http://sosideways.wordpress.com/ Last edited by SoSideways; 04-12-2010 at 01:19 PM.. Reason: I made up my mind about which way to go.