I'm going to a HPDE next weekend with my RS-Enthalpy tuned SR20DET highport and would like some experienced advice on setting up my KWv3's. I'll be at Sebring. For those that have not been down here, I've attached a pic of the course:
I spoke with a KW representative and he provided the following advice for setup on my '97 240sx.
Adjustment w/S14:
- More rebound and less compression for street
- More compression and less rebound for track
- Linear springs on kit should not be negatively impacted by ride height adjustments
Some additional info: Martin was able to put down about 241hp at the wheels on 7lbs of boost. I'll be installing z32 calipers this weekend with 30mm vented rotors and Carbone Lorraine CR6E pads. Wheels are stock 16" SE and tires are crappy Bridgestone RE760's that I know are not even close to ideal for this type of thing, but they'll have to do until the next paycheck
For those running KW's or something similiar, please let me know what you recommed for a good starting point and the best procedure for dialing in the best settings.
Thank you!