Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

projectRDM · 09-13-2009, 07:41 PM

There is no C-clip on the axle. The output shafts have a C-clip on them where they snap into the differential, but you don't need to remove them unless you're swapping them as well. If so, remove the axle first, then pry it out with a small prybar, they pop loose easily.

Also, why are you removing the hub if you're just replacing the axle? The hub does not need to be touched, just remove the old axle, slide the new one.

09-13-2009, 07:41 PM	#4
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 47 Posts: 13,812 Trader Rating: (12)	There is no C-clip on the axle. The output shafts have a C-clip on them where they snap into the differential, but you don't need to remove them unless you're swapping them as well. If so, remove the axle first, then pry it out with a small prybar, they pop loose easily. Also, why are you removing the hub if you're just replacing the axle? The hub does not need to be touched, just remove the old axle, slide the new one. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com