|
It's ok. I recognized your name and I'm local so I could run those wires for you in about 5 minutes, but if you have everything under control then it's ok.
I am not sure what pictures you want, and how the pictures would help you. I already told you the wire colours you need to hook up to the antenna. It's just constant power and antenna trigger.
The speaker amps have nothing to do with the antenna so this information is irrelevant.
I am 99% sure the antenna trigger wire is blue on the headunit.
You need to use your FSM and see if you have the power antenna harness connector already on the body harness. If so then you can make your own connector. If not then you'll have to run your own wires as well.
It's just 2 wires. If you have the factory harness than even if the wires are discoloured you can use a multimeter and figure out which one is constant power and which one is antenna trigger. Ground can go straight to the body.
I don't know how simpler I can make it for you. If you're as good as you claim to be then it should be no problem. Good luck.
|