View Single Post
Old 05-28-2010, 07:12 AM   #25
jspaeth
Nissanaholic!
 
jspaeth's Avatar
 
Join Date: Mar 2006
Location: Philadelphia suburbs
Age: 37
Posts: 2,347
Trader Rating: (7)
jspaeth is close to perfectionjspaeth is close to perfectionjspaeth is close to perfectionjspaeth is close to perfectionjspaeth is close to perfectionjspaeth is close to perfectionjspaeth is close to perfectionjspaeth is close to perfectionjspaeth is close to perfectionjspaeth is close to perfectionjspaeth is close to perfection
Quote:
Originally Posted by Technology View Post
I don't know too much about 240's but I use bpr8es plugs in my conquest gapped to .25. I use e85 fuel, 22psi and about 390whp. My tuner was saying he's tuned some evos with a .09 plug gap, but they are very high boost e85/e98 cars. Also, I was using a stock DSM coil pack and had a very noticable power drop at higher rpm. We switched to another one and the power was back up to where it should have been. With the weaker coilpack, the tuner had increased timing to compensate and after switching, we saw knock and had to pull some timing, but power wasn't affected.
I really want to use BCPR8ES, but they don't make them anymore.

BPR8ES has a 13/16" hex portion, too wide for an SR well I believe.

Plugs show that they are sufficiently cold, so 8s are probably overkill anyway and will foul too much for a lot of the local driving I do
__________________

Daily driven
jspaeth is offline   Reply With Quote