Quote:
Originally Posted by Irresistible
I was wondering the same thing...
|
Taken from
"The 12volt.com" for all your car electrical needs.
You could have each corner light blink when each turn signal blinks by interrupting current to the corner lights when the turn signals are on with an SPDT relay for each side. Connect the lead that shows 12V+ at one turn signal lamp to terminal 85, connect terminal 86 to ground. Cut the lead that shows 12V+ on the corresponding corner lamp and place one side to terminal 30 and the other side to terminal 87a (doesn't matter which one goes to which). Repeat for the other side. When your turn signal is on your corner lamp and turn signal will flash alternately (while one is on, the other will be off).
If you want the corner lamps to flash at the same time as the turn signals, you'll have to connect the lamp side of the cut corner lamp wire to terminal 30, connect terminal 87 to a fused constant 12V+, and insulate the other end of the corner lamp lead. Leave terminals 85 and 86 connected as described earlier.
If you had something else in mind, just let us know.