Well here goes - ive done all this from scratch with wiring diagrams and following wires and circuit boards so may not be 100% but at lease we have an idea and a place to put all the info.
Ill still advise getting asmany wiring diagrams as you can though as this aint gonna be 100% and is done for a UK car that had a CA as standard.
All this is from my original notes and I know ive fiddled with one or 2 wires but cant remember what.
This is how ive gone about labeling the wires and connectors.
Connectors are done A -> C going left to right as you look at the back of the cluster.
Wires are numbered top left -> top right and bottom left -> bottom right. This is also done from looking at the speedo from the back (aka looking from the wiring side nto the cluster side).
No number = no wire
S13 CLUSTER WIRING :
A1 TM
A2 Chg
A3 Ground
A4 No wire
A5 Batt
A6 Door
A7 Ign
A8 Brk (diff)
A9 Oil
A10 Brk (handbrake)
B1 HICAS
B2 Ill+
B3 Tam
B4 Beam
B5 Beam
B6 T/R
B7
B8 Ill+
B9 Jap writing
B10 10K
B11 T/L
B12 Ground
C1 Jap writing
C2 2P
C3 Ill-
C4 Fuel
C5 FM
C6 ALB
C7 Main beam
C8 Main beam
C9 PWR
C10 Exh
Now the R33 one
A1 Engine light
A2 Door
A4 Ground
A5 R/T
A6 Main beam
A7 Seat belt
A8 Oil
A9 Ign
A10 Exh
A11 Chg
A12 T/L
B1 Ill-
B2 Tam
B3 Jap writing
B4 2P
B5 Speedo -
B6 BM-
B7 Ill+
B10 Ground
B11 OM (oil)
B12 BM+
C1 Brk
C3 Fuel
C5 Ill-
C6 FM
C7 HICAS
C9 TM
C10 Ill+
So due to all this this is how you join them up
S13 car ------------------- R33 cluster
A1-C9
A2-A11
A3-A4,B1,B10,B12
A6-A2
A7-A9
A9-A8
A10-C1
B1-C7
B2-C10
B3-B2
B6-A5
B8-B7
B9-B5
B11-A12
C1-B3
C2-B4
C3-C5
C4-C3
C5-C6
C7-A4
C8-A6
Feel free to update, slag off etc :wack: