Ah, its always nice when a package from Japan comes in
, bought this ancient but barely used complete Blitz k3t turbo kit.
It utilizes a German Borg Warner kkk blitz spec K3T 3070mga turbo, bottom mount blitz cast iron manifold blitz c42 external wastegate and some nice original heat shields.
This kit was modified so that the wastegate dumped back into the exhaust system. I thought it was super nice but unfortunately the LHD steering rod was in the way. Now it will get a screamer pipe which I still need to get made (I can't weld
).
Test fitted
After modifying the pipe that leads to it the wastegate clears the steering rod by about 1,5cm.
I also fitted some gauges to monitor the engine
I'm actually still searching for instructions to fit the Tomei egt and A/F gauges.
New wheels, Work vs-xx 17x8et10 front 17x9et22
the inner arches will need rolling, but no outward rolling. Tires are 215-45-17 225-45-17
New red silicone hoses frow viper performance (notice the tomei strutbrace diagonal still doesn't fit at the intake manifold)
exchanged the Mocal oil cooler for a Setrab one with AN fittings
I will be getting the power fc mapped to run the engine on E85 in the future so I got Sard 850cc injectors that will replace the current 555cc nismo items
Cars out of the garage with the rs13 on its new rims
Started prep work to polish the greddy intake mani (Of course I test fitted it and the tomei strutbrace finally fits, whoohoo)
Its modified for the use of a q45 throttlebody, here compared to the s14 one
Next department I will be looking into are the brakes, mod list so far:
Engine Mods
1998 S14a sr20det
Blitz cast iron exhaust manifold
Blitz type C-42 external wastegate
Blitz k3t turbo
Tomei 256in 256ex poncams
Tomei rocker arm stoppers
HKS type-s fmic
Blitz, HKS, Greddy intercooler piping.
Apex'i power fc and boost control unit
Koyo 3-layer radiator
HKS intake filter
Blitz intake piping
Z32 MAF
Viper performance red silicone hoses for intercooler, intake, vacuum and radiator lines
JIC 3" catback exhaust
Blitz down/frontpipe
SARD tcv
OS giken ts2b twinplate clutch
Nismo clutch slave cyliner
Nismo pivot
Nismo clutch line
Nismo 555cc injectors
Greddy pro iso8 spark plugs
Setrab oil cooler
Grex oilfilter relocation block
Bosch fuel filter
SARD fuel pressure regulator
SARD oil catch tank
Earl's fittings for stainless oil and fuel lines
Handling mods
Work VS-xx 17x8et10 front 17x9et20 rear toyo r888 tires.
JIC FLTA-2 coilovers
Tomei 3-point front strutbar
ARC pipe anti roll bars
Nismo transmission mount
GT-spec engine mounts
S14 brakes
Style Mods
S13 Silvia front-end with oem aero front bumper and custom lip.
OEM S13 Silvia sideskirts
Kouki 180sx rear lights
B-wave rear wing
Doobie rear under aprons/spats
Audio Mods
cheap 2way amp on which I plug in my mp3 player, standard clarion front speakers.
Interior Mods
Recaro SP-G drivers seat
Recaro SR passenger seat
B&M shortshifter
Tomei steering wheel
Tomei shift knob
Tomei boost meter
Tomei A/F meter
Tomei Egt meter
HKS oil temp meter
HKS oil press meter
HKS boost meter
Blitz voice guided turbo timer
Alcantara door panels shift boot and glovebox
Origin checkered floor mats