|
I read something about the apexi ecu not sending signal to the ecu relay. Dont know if this is accurate, but I thought id do a check on pin 4 which is for the ecu relay both with the E5 original which had 0.87v. The same pin had 12 something v on it with the apexi unit in when ign was on. Does not seem right i guess? Also with the E5 i can hear the relay "clicking" in the engine bay when i turn ign on. This does not happen with apexi unit. Any ideas what could be wrong? If this is the problem, any way i can force the relay to start, or bypass this some way?
|