|
just use a jack. heavy duty jack.... your going to be working with your hand in between engine and crossmember.. heres the steps.
1.raise car on jack stands.
2.loosen engine mount bolts till almost very last thread
3.jack up engine from where the tranny meets engine and make sure to put a 2x4 so it wont damage anything. also make sure youll still be able to get to the bolts on the back.
4.unbolt the sway bar and careful with it swinging down towards your forehead lol
5.unbolt the pan in order. check fsm. taking off the pan is tricky you have to kinda manuever it around.
6. clean and put rtv on oil pan
7. repeat backwards and tighten everything.
__________________
"My car got into a fight with a 18 wheeler, and the truck won."
|