Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

In The Works · 01-08-2013, 06:38 PM

OK done a bunch of searching and can't find it. I need to know what size the fitting is that goes into the Clutch Master Cylinder to connect the soft conversion line. The used one I got doesn't have the male/male fitting on it and I need to go get one. Thanks in advance

Thanks for the help everyone. It was tough wading through all the instant responses...Whew

-3an x 10mil 1.0 straight through whoever you call your looking for a AN to Metric adapter if they say they have them then you can give them the size. Those located in the Long Beach Ca area I was able to find mine at Deering Industries

01-08-2013, 06:38 PM	#55
In The Works Zilvia Junkie Join Date: Feb 2006 Location: Sasebo, Japan Posts: 527 Trader Rating: (17)	OK done a bunch of searching and can't find it. I need to know what size the fitting is that goes into the Clutch Master Cylinder to connect the soft conversion line. The used one I got doesn't have the male/male fitting on it and I need to go get one. Thanks in advance Thanks for the help everyone. It was tough wading through all the instant responses...Whew -3an x 10mil 1.0 straight through whoever you call your looking for a AN to Metric adapter if they say they have them then you can give them the size. Those located in the Long Beach Ca area I was able to find mine at Deering Industries Last edited by In The Works; 01-11-2013 at 06:43 AM..