Quote:
Originally Posted by NISR20MO
These brackets just mount the front calipers only, correct?
|
correct
Quote:
|
Any plans to fab brackets for the rear calipers as well?
|
none at the moment
Quote:
|
What brake lines would you use? - Custom/Stock Style/Z Conversion Lines
|
z32 conversion lines work, or have stainless ones custom made.
Quote:
Originally Posted by arabrockermang
I bought a set of SRT-8 rear calipers for front but no one is willing to measure them from center to center hole I'm 90% sure they are the same as the EVO/STI except they use a thinner rotor which a SVT Cobra has a similar offset.
|
Well the STi/EVO patterns are very similar but not enough
to make one bracket work for both like we originally wanted to
so my guess would the SRT calipers would need their own bracket made aswell
Quote:
|
With that being said I was under the impression that the STI fronts had the same bolt pattern as the Evo is that true?
|
no, they don't
Quote:
|
Also make some for the rear!!!! I bought a set for the rear but I didn't like the idea of drilling new holes where holes weren't before and tapping it. It doesn't appear safe to me. I'm thinking about trying to make them myself but heck if you guys are using carbon steel I'd rather buy it from you. I was just going to use mild.
|
see my response above
only way I can see us making brackets for the rears is if someone would
be willing to bring us calipers and rotors to measure and test fit with
we already spent a good chunk of money developing
these brackets -3 sets or calipers, rotors, etc
and frankly the interest isn't high enough for us to develop a rear solution
since z32 rears work well as it is.
Quote:
Also I'm new to this forum just joined today I'm actually have been part of Nico a few months though so I'm not a total  (also usto do everything the hard way that is figuring it out myself so glad forums are around now)
|
welcome aboard, spend some going through the FAQs and archives sections
and you'll be fine
Quote:
Originally Posted by cIutchkick
i might just need a set... i'll let you know
|
ok