Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

sleepyS14se · 07-09-2013, 09:53 AM

OK i have read the auto to 5spd swap FAQ and from what i am being told and comparing that to what i read it has misleading information.

I have a automatic 95 240sx with a bad engine. I have a complete ka24de and 5 spd trans,a random bracket a guy gave me he said i need for the 5spd swap, a harness, a lower harness, and a ecu, I also have The FRONT half of the driveshaft.

Now what i am trying to figure out is DO I NEED A 5 speed crossmember and do i need the back half of the driveshaft?

Also, anyone wanna recommend some basic maintenance i should do the the ka24de before i drop it in. I plan on doing front crank seal, rear main seal, V/C gasket set, and a oil pan gasket...anything else i should check?

07-09-2013, 09:53 AM	#1
sleepyS14se Zilvia Addict Join Date: Jul 2013 Location: Georgia Age: 32 Posts: 880 Trader Rating: (3)	S14 5 speed swap ?'s OK i have read the auto to 5spd swap FAQ and from what i am being told and comparing that to what i read it has misleading information. I have a automatic 95 240sx with a bad engine. I have a complete ka24de and 5 spd trans,a random bracket a guy gave me he said i need for the 5spd swap, a harness, a lower harness, and a ecu, I also have The FRONT half of the driveshaft. Now what i am trying to figure out is DO I NEED A 5 speed crossmember and do i need the back half of the driveshaft? Also, anyone wanna recommend some basic maintenance i should do the the ka24de before i drop it in. I plan on doing front crank seal, rear main seal, V/C gasket set, and a oil pan gasket...anything else i should check? __________________ 95 S14 se RB25DET 348whp