|
Toby,
I am having some issues with the H3 harness install. My car is totally dismantled so I have no way of measuring 12V. I'm sort of confused on the flex relay wiring for the alarm and the white wire for the car.
Do I tie the red/white, red/black, and the solid red together and solder that to the fuse side of the white wire?
Do the pink/black and the pink/white get attached together and soldered to the white wire on the key side?
Above it says that the pink/black and the pink/white wires are both 12V non constant, but the pink/white is on the car side and the pink/black is on the key side, this is confusing me, maybe it would be easier if I had a 12V supply, but some help would be greatly appreciated.
Thanks
|