Quote:
Originally Posted by Trinidrift3
im looking to change the hoses and fittings for my sr20 redtops stock power steering setup. would you happen to know what i would need? as many others, i too have no idea how fittings work
|
This should be approximately what you need:
Power Steering -6 AN - High Pressure
Description----------------Part No--Qty
PS Hose BLK--------------519006--2ft
90* -6 Steel---------------509006--2
M14x1.5 -> -6 O-ring----491415--1 (for rack)
M16x1.5 -> -6 Crush------871606--1 (for pump)
Low Pressure -6/-10 AN
XR31 Hose (-6)------------3106-00--3ft
XR31 Hose (-10) ----------3110-00--2ft
M16x1.5 -> -6 O-ring-----491615--1 (for rack)
-6 90* BLK----------------209006BB--1
-6 Straight BLK----------100006BB--1
-10 Straight BLK--------100010BB--1
-10 90* BLK-------------209010BB--1
-10 Alum. Weld On-------997110--1
This is assuming you get the -10 aluminum weld on TIG'd to the return on your pump and that you have an external reservoir with -6 inlet and -10 outlet fittings. Those hose lengths give you extra as well.
Something like this, but with a -10 outlet. -8 outlet would work too, just need to get the proper sized hose and fittings, i.e. replace all -10 in the low pressure side above, with -8.
You can get it all from Toby (except the reservoir, though the
Chase Bays one would work too), it may seem expensive but it is well worth the cost and Toby is excellent to work with. I would recommend picking up their aluminum vise jaws, really helps with installation.
cheers
-Evan