Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Keeping 240sx pop-up headlights with the Part Shop Max Intercooler Kit

The_Lorax · 10-01-2011, 03:48 PM

http://youtu.be/C6dgPk5m13A

This was done by cutting the factory pop up headlight arm in half and fitting a length of steel tube over the top.

Next we put two 90 degree bends in the tube and made a bracket that turned the motor sideways, bolting it through two factory holes on the chassis rail.

The headlight motor cover will be welded to the bracket soon and I will do a full writeup of the modification. Do you guys want a scale drawing of the brackets we made?

10-01-2011, 03:48 PM	#1
The_Lorax Join Date: Aug 2010 Location: New Zealand Age: 36 Posts: 9 Trader Rating: (0)	Keeping 240sx pop-up headlights with the Part Shop Max Intercooler Kit http://youtu.be/C6dgPk5m13A This was done by cutting the factory pop up headlight arm in half and fitting a length of steel tube over the top. Next we put two 90 degree bends in the tube and made a bracket that turned the motor sideways, bolting it through two factory holes on the chassis rail. The headlight motor cover will be welded to the bracket soon and I will do a full writeup of the modification. Do you guys want a scale drawing of the brackets we made?