Quote:
Originally Posted by mikeroy420
Got it. Thanks again
If I was to use the the dome light supervision output, how would go about doing that?
Connect the alarms green and black/white together. Connect them to the red/white in the dirver's side kick panel and ground the alarms violet?
|
First simply try wiring black/white in with the green for the door trigger. Sometimes the ground output of the black/white is strong enough to turn on the dome light. If it doesn't work then you simply need to wire a relay to beef up the ground output of the black/white wire.
Relay:
85 --> Black/white
86 --> 12 volts constant
87 --> Ground
30 --> Vehicle's door trigger(so just tie it in with the green wire on the Viper)