|
Well, due to a slight unforeseen issue, my tie rod ends ended up being about 1/8" longer than the stock setup for stock ride height.
I will put everything together and see if it will work out or not, then decide what I'm going to do from there.
A little consolation for me is that, the tap that I bought for the machine shop to use is not a bottom tap, so there's a little bit of material left on the very bottom of the hole that is untouched, so as long as I can get a bottom tap and a handle, I might be able to hand finish that little bit and gain a little more adjustments out of my tie rod ends.
It might turn out that that is unnecessary though.
I will keep you guys posted on this.
BTW, just a quick head count... who all might be interested in my tie rod end setup? Remember, this isn't for minor adjustments or stock like ride height, this is for the more hardcore crowd; these are meant for where the SPL Parts ones left off.
I know Mr. Codyace is interested in a set, but who else might be interested?
|