I'm not well versed in all this but, I don't see how anything changes (other than camber) when slotting the lower coilover mount, because the upper top hat has a pillowball, and isn't going to stay perfectly perpendicular to the coilover as shown in that picture. It's just going to pivot at the tophat pillowball no?
Quote:
Originally Posted by az_240
It will hold fine but have you ever tried torquing these bolts down with the upper hole slotted? It's damn near impossible to keep the spindle from moving unless you put a jack on the hub and jack it up a little to keep it at full neg.
|
Yeah I have and i've never had a problem. You tighten the bottom bolt (not slotted) first and it doesn't move.