Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

danbarnett123 · 07-01-2019, 08:11 PM

Not sure if your zenki lip uses the same hardware as my Kouki, but here are some part #s for a Kouki.

01241-00113 or 00431
Clips

08146-6202G
Bolts

If I ordered from Nissan or z1 or concept z it would have come out to $70+.
Instead, I went to my local hardware store and spent $9 on:
M6 1.0x20 hex bolts
M6 flat washers
Metric u nut 6x1.0 (these look like money clips with a threaded insert).

Once again this was for Kouki but I would assume it would work for you too.
Hope this helps

07-01-2019, 08:11 PM	#3
danbarnett123 Zilvia Member Join Date: Sep 2013 Location: so cal Posts: 216 Trader Rating: (0)	Not sure if your zenki lip uses the same hardware as my Kouki, but here are some part #s for a Kouki. 01241-00113 or 00431 Clips 08146-6202G Bolts If I ordered from Nissan or z1 or concept z it would have come out to $70+. Instead, I went to my local hardware store and spent $9 on: M6 1.0x20 hex bolts M6 flat washers Metric u nut 6x1.0 (these look like money clips with a threaded insert). Once again this was for Kouki but I would assume it would work for you too. Hope this helps __________________ 1991 Z32 NA t-tops 5 speed 1997 S14 KA24 5 speed