Okay so heres the photos from the last few things i have done.
first, the intake. I got rid of the ugly standard plastic pipe the goes across the front of the radiator and i used a bunch of silicon hoses and aluminium pipes I had around. I had to drill a hole in the 90degree pipe straight off the throttle body to keep the cold start. I got a brass fitting with a nut on the end and put it in the hole and tightened the nut, sealed it up with some industrial pipe sealer. Then simply put the cold start hose onto it.
no more ugly black piping
new piping setup
I also painted the boot lid. the last owner painted the car really badly and left sanding scratches throughout the entire paintjob so I simply sanded with 180 grit, then 320 grit, used 3 parts filler primer to 1 part thinner, whacked it in the spray gun and gave it 3 coats with that. sanded with some 800 grit sandpaper, then 3 coats of matt black. It wont stay matt black that is just a very temporary colour.
came out sweet. Just needs a fine wet sand
