|
No, key side and car side simply refer to when you cut a wire in half. So when you cut the white accessory wire in half, you now have two ends to connect to. One of those ends is called the "key side" because it's the end of the wire that leads eventually back to the key cylinder. The other end of the cut white wire leads back into the "car".
You will ignore the wires/colors that are physically attached to the back of the key cylinder. I can't tell in your pictures, but it looks as though you have the violet wire tapped directly into the black/yellow. This is the starter wire... so you will want to cut this wire in half, same manner as the white wire and attach the Viper violet to car(starter) side and the Viper green wire to the key side.
|