nsn240

I didn't read through this whole thing...

But i'm redoing the wiring in my hatch... pulled all the harnesses and worked backwards from the component into the harness - then depinned or cut it out. Eliminated all the popups/ac/auto trans/fog etc etc, only wires running up front are lights/horn/fan, everything thats left fits into one factory fuse box inside. Also ran my fuel pump, fan and defi's to fuses that were freed up in that box

Pulled all the seatbelts, A/T. A/C etc from the chassis harness. Goal was to pretty much shrink the factory wiring as much as possible without doing a full rewire from scratch

Been thinking about making a thread but im lazy

edit: read everything, good info.