Quote:
Originally Posted by Trinidrift3
im looking to change the hoses and fittings for my sr20 redtops stock power steering setup. would you happen to know what i would need? as many others, i too have no idea how fittings work
|
I'll have to try and do some research. I haven't personally replaced the power steering setup before on the 240 rack and SR/KA pump, so I don't know. I'm pretty sure you will need some M16x1.5 adapters and M14x1.5. You will need some -6 high pressure power steering hose.... I assume you want black? It also comes in blue. You will then need some -10 braided nylon hose or braided stainless hose for the low pressure side. You will need some steel fittings for the high pressure hose and aluminum fittings for the low pressure hose etc..
Like I said, I'll try to search Zilvia etc for some more info. In the meantime maybe you can do the same and see what you come up with. I don't get a lot of extra time to search for answers.
Quote:
Originally Posted by inopsey
might be a dumb question but rather know this before spending money; can you use these fittings on any type of stainless braided line or do they only fit properly on xrp brand hoses?
|
Not for sure? I would need to know what hose you have and what the exact inner diameter is? I have seen people use one brand of fitting on another brand of hose... but I wouldn't recommend it. I would match the brand of fitting with the brand of hose to be safe.