Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - bolt between coilover and knuckle spindle? help fellow Zilvians!

upSLIDEdown · 07-25-2008, 01:27 PM

Probably to keep the knuckle from moving back towards the coilover (causing wheel contact if the clearance is tight). Some people have to pull it out right there, and then put the camber back in with the camber plates.

Hope that makes sense to you, kinda hard to describe.

07-25-2008, 01:27 PM	#3
upSLIDEdown Nissanaholic! Join Date: Oct 2002 Location: VA.. And for those that keep PMing me asking what kit I have, it's Origin Stream. Posts: 1,728 Trader Rating: (3)	Probably to keep the knuckle from moving back towards the coilover (causing wheel contact if the clearance is tight). Some people have to pull it out right there, and then put the camber back in with the camber plates. Hope that makes sense to you, kinda hard to describe. __________________