View Single Post
Old 07-06-2014, 06:34 PM   #5
PeterSportiello
 
PeterSportiello's Avatar
 
Join Date: Aug 2013
Location: Long Island New York
Age: 26
Posts: 19
Trader Rating: (0)
PeterSportiello is an unknown quantity at this point
Quote:
Originally Posted by jakemkz View Post
If you check the plugs in the dead cylinders do they show evidence of fuel? If you listen to the injectors using a stethoscope or screwdriver can you hear them tick? If the injectors are not firing but you are sure the wiring is good the next place to look would be the ECU. You could try switching the wiring from a good injector to a dead one and see if that brings the cylinder back (injection timing will be way off while doing this so just test it for a short time at idle). Good luck.
thanks you for the reply bro, I don't know how I could switch the injector clip from a good cylinder to another one bc of how little of play there is. but ill try to do that tm. and do you know off hand if there are any fuel system fuses that could be bad. or are there injector solenoids that could be bad or is the wiring for the injector harness straight from the computer? ive never had an issue figuring out a problem like this its so frustrating dude. thanks for your help again bro. I really appreciate it.
PeterSportiello is offline   Reply With Quote