Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - This is the roll center, suspension pickup, and steering angle modification thread.

swiftmini · 09-14-2010, 09:45 AM

I have input my dimensions into cad and ill get a jpg up on here asap.

So i need to take some more accurate dimensions for a better idea, but anyways the approximate roll centre height is 70mm, 2 3/4" below ground level.

if i were to have the inner and outer lca pickups at the same height from the ground at 150mm, 6" the roll centre height would be approx 60mm above ground level.

i will double check the autocad and post it up, i will also work on getting better measurements and post them up.

cheers
kev

09-14-2010, 09:45 AM	#1631
swiftmini Zilvia Member Join Date: Jan 2010 Location: uk Age: 38 Posts: 227 Trader Rating: (0)	I have input my dimensions into cad and ill get a jpg up on here asap. So i need to take some more accurate dimensions for a better idea, but anyways the approximate roll centre height is 70mm, 2 3/4" below ground level. if i were to have the inner and outer lca pickups at the same height from the ground at 150mm, 6" the roll centre height would be approx 60mm above ground level. i will double check the autocad and post it up, i will also work on getting better measurements and post them up. cheers kev __________________ [SIGPIC][/SIGPIC] Last edited by swiftmini; 09-14-2010 at 02:25 PM..