April 2013.
The coilovers and alignment arms were installed (with MUCHHH thanks to my mate).....all bushes were reset as necessary to allow for the new coilovers and ride height. The factory bolts were actually veryyy hard to get off....(but keep in mind this is a 100% stock car that I've started with). It took roughly 10 hours.
Front coilovers installed (including Ikeya formula front castor and cusco tension bar).
Noticed a smidge of surface rust on the rear camber arm near the weld where a touch of paint was missing....wire brush + primer/black paint = problem fixed.. notasinglefkwasgiven.
Progress..
Rear coilovers installed, including Ikeya Formula rear camber arms (pillow-type) and Ikeya Formula rear toe arms (bush-type).
After a few adjustments and some trial and error, the ride height was sorted. Very happy with how its sitting, and at this height the control arms are almost bang-on parallel with the ground.
