|
There seems to be a few single plates that will do. Spec stage 3 or stage 3+ is one that will do 500+ ft lbs (which is how clutches should be measured).
Any twin plate will meet your needs.
A few items considering I have had a multitude of clutches over the years (from a ATS twin carbon carbon, to a FX500, to a stage 3 Spec, etc etc)
Disregard what people say about pedal feel for the singple plate. Unless a super heavy PP (FX500 or HD ACT for example), the single plates leg pressure are only slightly above that of a twin
However, the twin engagement is much smoother than over any single present that can handle over 400 ft lbs at the the wheels. Also, depending on twin plate, some are just inherently noise. Part of my problem is the JK41 is a noisy bitch, and account for a majority of the gear stack clatter from from the gearbox area. I would have kept my ATS twin if I had realized just how loud the CDxxx/JKxx gearstack was so loud.
My recommendation; grab a Sped stage 3 and go to town. If not, grab any flavor of twin. However, keep in mind, the metalic/or sintered based twins can also be fairly grabby,
|