Stern Schmiede R16-S
18x11 +13 front and rear
3.5" and 4" lips
5x114.3 PCD, 73mm center bore
$2500
Shipping/insurance to the lower 48 states is around $160
Located in Dallas, TX.
I can be reached at **972**850**6215**
Thicker backpads and narrower lips on the front
Double step build, using off the shelf parts with stem hole on the lips . 2 of the lips and 2 of the barrels are new. All new zinc plated nuts. Billet center caps, bullet shaped(semiwadcutter was the inspiration).
Can test fit if local to DFW. Can also assemble staggered 10.5 and 11.5; as well as 9.5" and 10.5(I have 2" lips for the front.).
No cracks, bends or welds. No curb rash.
Album, full size pics
https://imgur.com/a/XUAg800
