Quote:
Originally Posted by DRIFTING_SIL_EIGHTY
The noise could mean that your low on tranny fluid. Usually its the throw out bearing but it stops whining when you step on the clutch. Since yours does it with clutch depressed or not, it could be the fluid.
Yes the trans are the same.
|
wrong. the transmissions are NOT the same.
The Ratios ARE different, The bellhousings and cases ARE different.
but to answer your question bud yes you can go SR with a KA tranny but you do need to swap the bellhousings, and when you pull the bellhousing off your new KA trans BE SURE TO ADJUST THE SHIFT FORKS BACK TO WHERE ALL 3 OF THEM ARE EQUAL LENGTH OR YOU WILL NOT BE ABLE TO SHIFT THROUGH ALL THE GEARS AFTER YOU INSTALL YOUR TRANS! you might have to combination a little bit with the shifter and the forks. But once its done everything should mesh smooothly
