Quote:
Originally Posted by TTrx7Pete
Regular Dot 3 or 4 Brake Fluid is all you need for that.
Definitely bleed it and see if that helps.
The rattling could be a bad throwout bearing. Also check your transmission fluid levels and make sure it's topped off.
Other than that, if you go about replacing the clutch, use the FSM. It will have all of the torque values and the order/steps of removing the transmission bolts. It's a pretty straight forward process if you have replaced a clutch on an AE86.
Just make sure to make your life easier that you have a lift, transmission jack, a friend, and some pneumatic tools. Swivels are a bonus.
|
thats good advice. you wanna make sure everything is working properly with the simple stuff 1st before doing a job like a clutch.
check tranny fluid, hydrolic lines, slave cylinder, and the clutch master cylinder for leaks. if all checks out ok then make further hyposisies