Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

In The Works · 03-31-2013, 02:50 PM

I bought a spare rear subframe to install new bushings and essentially do all the work to beforehand so changing everything out is a drop out the stock one and have another built and install straight back in. Keep my car from being down more than a day.

After getting the old bushings out I was cleaning it up to prep for paint and I noticed its not sitting flat on the ground. Is this normal? It's not much. maybe one corner is off the ground by like a 1/4 inch. I don't see any tweaks in it. Is there specific areas I should look for bends?

03-31-2013, 02:50 PM	#1
In The Works Zilvia Junkie Join Date: Feb 2006 Location: Sasebo, Japan Posts: 527 Trader Rating: (17)	S14 Rear Subframe possibly bent I bought a spare rear subframe to install new bushings and essentially do all the work to beforehand so changing everything out is a drop out the stock one and have another built and install straight back in. Keep my car from being down more than a day. After getting the old bushings out I was cleaning it up to prep for paint and I noticed its not sitting flat on the ground. Is this normal? It's not much. maybe one corner is off the ground by like a 1/4 inch. I don't see any tweaks in it. Is there specific areas I should look for bends?