Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

that1guywithans13 · 03-20-2016, 09:31 PM

Hey guys so I'm piecing together my suspension and wanting to get my alignment done in the next couple of weeks. My setup is this:
● Powered by Max coilovers (8k front/6k rear springs)
● godspeed front sway bar
● aftermarket rear upper control arms
● aftermarket toe arms (rear end)
● aftermarket traction rods (rear end)

I want to set up the car for weekend track/autocross events. I'm planning on running

Drop ~ 2.5 inches

FRONT:
Camber: -2.5°
Caster: 7.0
Toe: 0.0

REAR:
Camber: -1.5*
Toe: 1/8 total

The question I had is can I get the front end to align to those specs or do I need aftermarket tie rods and tension rods? I'm really low on funds do to being on disability at the moment so if I can get along without spending more cash that'd be great!

Thanks in advance guys

03-20-2016, 09:31 PM	#1
that1guywithans13 Zilvia Member Join Date: Mar 2010 Location: orange county Posts: 203 Trader Rating: (11)	* S13 alignment. Track gurus please read Hey guys so I'm piecing together my suspension and wanting to get my alignment done in the next couple of weeks. My setup is this: ● Powered by Max coilovers (8k front/6k rear springs) ● godspeed front sway bar ● aftermarket rear upper control arms ● aftermarket toe arms (rear end) ● aftermarket traction rods (rear end) I want to set up the car for weekend track/autocross events. I'm planning on running Drop ~ 2.5 inches FRONT: Camber: -2.5° Caster: 7.0 Toe: 0.0 REAR: Camber: -1.5* Toe: 1/8 total The question I had is can I get the front end to align to those specs or do I need aftermarket tie rods and tension rods? I'm really low on funds do to being on disability at the moment so if I can get along without spending more cash that'd be great! Thanks in advance guys __________________ ITS ALL FUN AND GAMES TILL THE FLYING MONKEYS ATTACK..