SMM

Ok I have searched and searched. All I am getting is mixed answers, I also looked in the FSM.

Some people are saying they stripped the cam sprockets bolts when torquing to factory specs or have even broken cams.

This is what I have come up with.



Cam Cap Bolts:

Tighten: 1.4 (FOOT LBS) in sequence then to 8.7 (FOOT LBS)


Cam Sprocket Bolts:

123-130 ......really thinking only to do 90 ( FOOT LBS )

Idler Sprocket Bolt:

40-60 FOOT LBS



Others:

Crank Pulley 150 FOOT LBS
Chain Guides 17 FOOT LBS
Chain Tensioners 7 FOOT LBS