Quote:
Originally Posted by codyace
Oh man that's certainly an oil supply issue then. Take the squrters off, soak them, and blow compressed air through them to sort it out.
I still do doubt it's a rod bearing, check that top end. Also pull the tensioner out to see if it's got oil in it.
|
Precisely, thanks. I thought the same about it not being rod related as the sound is mostly coming from the top and side of valve cover, but who knows. I will clean the oil squirter tubes up a little more intense and then see if its the same thing.
Quote:
Originally Posted by cotbu
The port on the cam cap, I think you don't have them torqued right, but they could be clogged or misaligned.
It's a lil hole next to the bolt hole, it runs diagonal to the bolt hole then shoots oil out of the banjo to the squirters.
The sound in the first video sounds like symptoms of loose cam bolts sort of. You have to rev yours the last time i heard that it was at idle speeds
|
Roger that, I will check this in Morning and see if any screws are loose on the cam caps and such.
Also found these for torque specs :
