Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Firestorm · 01-11-2011, 01:37 PM

so much misinformation in this thread...

R32 GTR non-vspec and R33 GTs-T share the same calipers (the ones you have), rotors and pads except for the fact maybe that there were drilled rotors available for the R32 GTR from factory. the rotors for these calipers are 296x32mm. Z32 TT calipers use 280x30mm rotors, Z32 NA 280x26mm...

R32 GTs-T uses Z32 TT calipers, 280x30mm.

i doubt that Z32 pads will fit in the R33 caliper but if they do, they won't use the rotor surface as effectively as the R33 pads would.

and before anyone asks, i've worked with all of those brake setups but never mixed and matched. but about the rotor sizes im 100% certain.

01-11-2011, 01:37 PM	#15
Firestorm Zilvia Junkie Join Date: Sep 2007 Location: Germany Age: 34 Posts: 371 Trader Rating: (0)	so much misinformation in this thread... R32 GTR non-vspec and R33 GTs-T share the same calipers (the ones you have), rotors and pads except for the fact maybe that there were drilled rotors available for the R32 GTR from factory. the rotors for these calipers are 296x32mm. Z32 TT calipers use 280x30mm rotors, Z32 NA 280x26mm... R32 GTs-T uses Z32 TT calipers, 280x30mm. i doubt that Z32 pads will fit in the R33 caliper but if they do, they won't use the rotor surface as effectively as the R33 pads would. and before anyone asks, i've worked with all of those brake setups but never mixed and matched. but about the rotor sizes im 100% certain.