Quote:
Originally Posted by Broadfield
What are you wanting to do and I can try to help you out. It's actually pretty simple: - Figure out what hose you want to make/replace with an AN hose.
- Figure out what AN size you need and get a rough idea of what length of hose you need(for every -1 of AN it equals 1/16" of internal diameter. So a -8 is 1/2" diameter and a -16 is 1" diameter).
- Figure out what fitting you need at each location where said hose will attach(at the engine block or valve cover for example).
- Then decide what type of hose end you want/need... size/type to match the hose you choose, color, angle if any etc.
Yeah, this stuff is NICE! |
You make it sound so simple. Then again, you are a wiring guru. What I do want, are those radiator hose clamps, that you were running to start.