Quote:
Originally Posted by DreamN
Oh and the write up on here sucks ass. Ziptied had/has a better one.
|
Alright. I'll try blocking the pipe like you suggested before I start cutting up the jdm piece. My only question with that is why the air continues to blow even with the stock resistor being used.
Anyways, so the 16pin plug that is suppose to have a black wire that needs to be grounded by cutting the red/yellow stripped wire and grounding it. According to ziptied, it needs to be the stripped wire on the second plug, not the one the jdm harness plugs into that I have to cut and ground, right? Going by the videos, I cut the red/yellow stripped wire that is on the plug that the jdm one plugs into. Would that matter?
Oh, and I just happen to notice that on my harness, I have NO black wire on the 16pin plug that is suppose to meet that red/yellow wire that has to be grounded.