|
Diagram is actually on EL-66 and EL-67.
The switch itself has 6 wires that need to be hooked up...
1: Red w/blue stripe wire that supplies 12V when the headlights are turned on.
2: Blue w/white stripe output for setting 0
3: Blue w/black stripe output for setting 1
4: Blue w/red stripe output for setting 2
5: Blue w/yellow stripe output for setting 3
6: Ground to chassis
Then it appears for the head light motors themselves...
1: Connect with #2 above
2: Connect with #3 above
3: Connect with #4 above
4: Connect with #5 above
5: Orange w/green stripe that connects directly to battery with a 7.5A fuse in-line
6: Ground to chassis
These connections at the motors apply to both sides so you would wire them up together.
__________________
|