Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Corner Carver Suspension Setup-Street Use Only

Juantwo3 · 02-21-2014, 02:36 PM

I have 3rd FA500 coilovers mine too were bouncy until i adjusted the preload, the bounce was less plus i am about 10 clicks away from full hard i only keep it 10 clicks from full hard when hitting up GMR, street driving about 7 more from full hard. Maybe that will help with your bounce issue.

I agree with the guy above me TIRES make a huge diffrence i dont have the greatest tires out there but for what i use them for they serve better the. Reg tires i use hankook ventis v12 evos on. Z32 wheels

Only issues i have is the front i feel there is to much roll . Maybe i need to upgrade my front sway bar? My front consits of megan endlinks tein inner and outer tie rods steering rack ES bushings and alluminum steering bushing.

Any front end recomendations ?

02-21-2014, 02:36 PM	#6
Juantwo3 Zilvia FREAK! Join Date: Sep 2011 Location: DTFullerton Age: 30 Posts: 1,101 Trader Rating: (20)	I have 3rd FA500 coilovers mine too were bouncy until i adjusted the preload, the bounce was less plus i am about 10 clicks away from full hard i only keep it 10 clicks from full hard when hitting up GMR, street driving about 7 more from full hard. Maybe that will help with your bounce issue. I agree with the guy above me TIRES make a huge diffrence i dont have the greatest tires out there but for what i use them for they serve better the. Reg tires i use hankook ventis v12 evos on. Z32 wheels Only issues i have is the front i feel there is to much roll . Maybe i need to upgrade my front sway bar? My front consits of megan endlinks tein inner and outer tie rods steering rack ES bushings and alluminum steering bushing. Any front end recomendations ? __________________ GO DUCKS!!!!!!!!!