Thread: This is the roll center, suspension pickup, and steering angle modification thread.
View Single Post
Old 05-02-2010, 10:52 PM   #716
95KA-Turbo
Post Whore!
 
95KA-Turbo's Avatar
 
Join Date: Jul 2005
Location: LA
Age: 36
Posts: 3,402
Trader Rating: (19)
95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of
Quote:
Originally Posted by SoSideways View Post
The Tein S-chassis inners have like, 2" of threaded portion, and from what I could gather, is about 2" or so longer than the stock tie rods, and stock tie rods are the same length as the Z32 and Tein Z33 tie rods.

The problem with cutting the inners down would be that, I cannot provide that service for the others; people would have to find machine shops in their area to have their tie rods milled down, or if they don't have a machine shop nearby, they'd have to send it out. Not efficient or cost effective for anyone.
So, just to clarify, the Z32 and Z33 inner tie rods are the same length? The tie rod ends I made are pretty long and one of my inner tie rods is shot anyway, so I need to order new ones. I'd rather not have to cut up new tie rods.

Does anyone have any actual measurements I couldn't find any online.
__________________

Instagram - SJKnoop
95KA-Turbo is offline   Reply With Quote