Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

LongGrain · 10-05-2008, 05:44 PM

when we did mine we disconnected the RUCA, toe rod, and axle so we could tilt the spindle enough to get an impact driver back there to get the bolts. then we used an air hammer to slowly work the hubs out.

10-05-2008, 05:44 PM	#2
LongGrain Post Whore! Join Date: Sep 2006 Location: Midwest Posts: 2,741 Trader Rating: (5)	when we did mine we disconnected the RUCA, toe rod, and axle so we could tilt the spindle enough to get an impact driver back there to get the bolts. then we used an air hammer to slowly work the hubs out.