|
Welding up the holes is the best way. Weld in a patch for the marker light holes. If you can access the backside of that rear quarter, it would be a good idea to hammer and dollie the damage the best you can. Get the metal straightened out the best you can before you apply any kind of filler. People go overboard when using Bondo or any kind of fillers, and it looks like hell. Its supposed to be applied thin, for levelling. If its too thick it will crack and if its not applied to bare metal it won't stick properly. Like its been mentioned, always scuff the areas you intend to paint before applying paint for good adhesion. Make sure the area is super clean too so you don't experience fish eyes!
|