Quote:
Originally Posted by Danger_Dorn
So I have both a s14 ka compressor and an s13 redtop sr compressor. Correct me if Im wrong. The redtop comp. will bolt up to my redtop motor just fine but the lines will not work with s14 ones? and the KA needs and adapter but will bolt up just fine to my s14 lines?  |
Heres how I do it everytime i want A/C on an Sr20det.
Find A/C compressor lines that plug into the compressor. Make sure the O-ring matches up right, and they do not interfere with each other.
Now, use your chassis A/C lines and cut them such that they mate up straight to the compressor and do not interfere with anything. then tig weld them together. Make sure you remove all the burrs , debris, and clean with acetone before welding... because once its welded up you cannot clean the insides free of metal shavings. make sure you remove the oring and schrader valves before welding.
Only way to get around welding the lines is to find a compressor/bracket for sr20det that uses the same a/c lines as your chassis does.
or find a way / make a bracket that will allow your KA compressor to bolt to the redtop. And figure out how to make the belt work.